The control valve is a critical part of the control loop. The control valve manipulates a flowing fluid, such as gas, steam, water, or chemical compounds to compensate for the load disturbance and keeps the regulated process variable as close as possible to the desired set point.
A type of globe valve that has three pipeline connections to provide general converging (flow-mixing) or diverging (flowsplitting) service. Variations include cage-, port-, and stemguided designs, selected for high-temperature service, and end connections can be specified to mate with most piping schemes.
Actuator selection demands careful consideration, particularly for constructions with an unbalanced valve plug.
Pid controlled motorised valves with/without feedback positioner available for process industries requiring high accuracy. With soft seating available.
Specifications:
| DESIGN: | ASME B16.34/ISA 75 |
|---|---|
| SIZE: | 15mm TO 300mm |
| PRESSURE RATING: | 150#, 300#,600#
(Other pressure rating are available on request) |
| BODY/TRIM MATERIALS: | CI, WCB, CF8, CF8M, CF3M, Hastelloy C/B
(Other material grade are available on request) |
| CHARACTERISTIC: | Equal Percentage,Linear,Quick Opening |
| ACTUATOR TYPE: | Single Spring & Multi Spring Pneumatic Diaphragm type and Electrical Simulative
|
| ACCESSORIES: | Valve Positioner, Pneumatic, Electro Pneumatic, Smart Positioner, Air set Solenoid Valve, Air Lock, Limit Switches |
| SPECIAL FEATURES: | Also Available in Soft seating, bellows seal design extended bonnet (Finned) for cryogenic services and jacketed Body
|
| END CONNECTION: | Flanged end ANSI B16.5, 150#, 300# (RF, RTJ & TG)
(Other classes are available on request) |
| TESTING STANDARD: | FCI 70-2 |
